Refrigeration plant industrial refrigeration systems - newcold header

NewCold Systems
sensational energy savings

Refrigeration plant industrial refrigeration systems - newcold img01

NewCold: the eco-friendly “New Cold” by Freddo&Co.

The NewCold line is part of our Research & Development Division and is dedicated to the project and development of energy saving solutions to be installed on refrigeration plants (new and existing) to cut down on electricity consumption.

 

The savings achieved thanks to the NewCold System range between 10 and 20% and can reach up to 30%..
Freddo&Co. offers its customers the option of a free-trial installation, to get an idea of the actual energy saving achievable.

 

The NewCold line consists of the following systems which, projected to be non-invasive additions to plants, help to improve their performance. Besides guaranteeing remarkable savings, the higher efficiency, in fact, translates into less stress on the mechanical components and consequently lower costs to manage and service the plants.

  • CONDENSATION DYNAMIC CONTROL CDC
  • EVAPORATION DYNAMIC CONTROL CDE
  • SMART DEFROSTING SYSTEM SDS
  • WATERFALL ICE ACCUMULATION SYSTEM WIAS
  • FREE COOLING FC

In addition to these systems, Freddo&Co. can also provide several solutions for energy rationalisation (inverters, economizers, etc.). To book a personal and free consultation, simply fill out the form at the bottom of the page.

Refrigeration plant industrial refrigeration systems - newcold
Refrigeration plant industrial refrigeration systems - newcold num01

Condensation Dynamic Control (CDC)

In traditional plants, condensation is controlled by keeping the calibration value set at a fixed point throughout the year, regardless of the conditions of the troposphere. CDC, instead, consists of a PLC equipped with temperature, relative humidity and pressure sensors and transducers , which continuously interacts with environmental factors (troposphere) and the plant pressures and, by means of a dedicated software, constantly optimises the working conditions of the compressors, evaporator and condenser. So, the condensing temperature decreases, with an increased COP (Coefficient of Performance) and less power consumption. Freddo&Co.’s CDC system has several fields of application: it can be installed on refrigeration plants working with any kind of refrigerant and with any type of compressor, condenser, or evaporator. We projected the CDC specifically for air-cooled plants. Similarly, the CDC “Light” was projected for refrigeration units with low electric power (typical in the Large-Scale Retail industry).

Refrigeration plant industrial refrigeration systems - newcold num02

Evaporation Dynamic Control (CDE)

The dynamic control of evaporation is the twin version of Freddo&Co.’s CDC. The system continuously controls the various operating temperatures of the utilities to be cooled and accordingly adjusts the temperature of the refrigerant flowing into the evaporator or air cooler, so as to reduce and optimise the temperature difference to the default minimum temperature, in this case too, increasing the COP (Coefficient of Performance). The aim, in fact, is to lower the energy loss that occurs when heat is transferred between the fluid to be cooled and the refrigerant used.

Refrigeration plant industrial refrigeration systems - newcold 03
Refrigeration plant industrial refrigeration systems - newcold img04
Refrigeration plant industrial refrigeration systems - newcold num3

Smart Defrosting System (SDS)

This system also is made of a PLC and temperature sensors that, by monitoring operation of the evaporator’s heater elements, activate a localised defrosting sequence (which leads to energy savings and optimisation of the defrosting time), on the base of factual ice accumulation of ice on the coil.

Refrigeration plant industrial refrigeration systems - newcold num04

Waterfall Ice Accumulation System (WIAS)

This system can be applied to plants with serial ice storage banks. The cooling water of the utilities, instead of being configured by default to flow simultaneously and without distinction through all the banks, via PLC is made to flow entirely through the first bank in sequence, so as to ensure a continuous melting cycle and the re-accumulation of ice inside the bank. Only once this is guaranteed (thanks to temperature sensors that communicate with the PLC), the water is made to flow progressively into the other banks, ensuring maximum efficiency of the heat exchange between water and ice.

Refrigeration plant industrial refrigeration systems - newcold 05
Refrigeration plant industrial refrigeration systems - newcold img06

Refrigeration plant industrial refrigeration systems - newcold num05

Free Cooling (FC)

This solution is based on the principle of “opening the window when it’s cold outside”. An electronic control unit constantly controls the external conditions until they are favourable, so to blow air from the outside directly into the environment through a system of motorised dampers. This air, however, always passes through the air handling unit to be filtered. The ambient air is then expelled from an extractor located near the air handling unit (with the option of installing extractors in the premises near the windows). The extraction air flow rate is calculated based on the technical specifications of the extractors already installed in the premises. This system allows high energy savings during medium and low temperature seasons, as it is possible to cool the room without the use of compressors. The system also allows you to expel the air from the environment during washing, contributing to the fast drying of the premises by making the heated external air to flow inside the room.

Refrigeration plant industrial refrigeration systems - newcold img07
Refrigeration plant industrial refrigeration systems - newcold num06

Energy Efficiency – E4F

Thanks to the remarkable energy savings achieved by the NewCold line, Freddo&Co. has partnered with E4F Srl , which is an ESCo (Energy Service Company) accredited to entertain ties with the competent Italian Authorities in the energy industry.

The aim of the partnership is to conduct energy analyses and audits for our Customers and to provide customised, efficient and high-performing energy saving solutions, benefiting of the incentives available to operators in the field.

Reduce the energy costs of your refrigeration plants from 10 to 30%
WITH OUR NEWCOLD SYSTEMS

NewCold Systems, exclusive systems projected to lower energy costs, are installed by default on all refrigeration plants manufactured by Freddo&Co.
They can be implemented with the same outstanding results even on the existing systems of the most popular manufacturers, following preliminary checks aimed to verify the actual energy savings achievable.

Refrigeration plant industrial refrigeration systems - newcold img10
Refrigeration plant industrial refrigeration systems - newcold img11
Refrigeration plant industrial refrigeration systems - newcold img12
Refrigeration plant industrial refrigeration systems - newcold img13

The industrial refrigeration plants projected by Freddo&Co. guarantee the highest level of performance with the lowest energy consumption. To learn more, visit our Plants page

Sign up for a free trial installation of a NewCold system!

FIND OUT ALL THE BENEFITS FOR YOURSELF…

  • Analysis of actual electricity consumption
  • Performance tests of the NEWCOLD system installed on your plant
  • Projected forecasts of the actual savings you will benefit in one year
  • Free and customised trial

    CONTACT US FOR A FREE TRIAL OR QUOTATION
    We are at your disposal to provide any information you may need
    To request more information about Freddo&Co.’s technology, fill out and send us the form below.
    Your personal data will be used solely to respond to your requests.
    * Required fields
    captcha

    I accept the terms of the Privacy policy

    Or call us at +39 0424 472221